You are here: Home / Products / High Manganese Liner / Sandvik / Heat Treatment CS440 CS660 Crusher Forging Mantle And Bowl Liner

Heat Treatment CS440 CS660 Cone Crusher Spare Parts Forging Mantle And Bowl Liner Suit To Sandvik

Heat Treatment CS440 CS660 Crusher Forging Mantle And Bowl Liner


Availability:

Quantity:

Inquire

Model:
CS440/CS660
Brand:
ONA
Code:
847490
MOQ:
1
Material:
MN13/MN18/MN22
Porduction Time:
30 days
Payment Terms:
TT, Paypal, Credit Card, Western Union
Packing:
Iron Pallet

Suit to Sandvik single cylinder cone crusher machine.

Material: M1/M2/M7/Customized

Product Description

Inspection of liner
(1) The working capacity is significantly reduced, the thickness can be clearly reduced or cracks have occurred, which indicates that the lining has been worn.

(2) When the main shaft is raised and the distance between the top nut and the underside of the arm does not exceed 15mm, the liner must be replaced.

(3) Check the wear condition every week, and check the wear condition in the crushing chamber

Select 4 points around to measure to confirm whether there is uneven wear. If so, check the feeding situation and make correct adjustments.

We Supported a wide range of alloys with different Heat treatment capabilities
Austentic Manganese steels 14%MN, MN13CR2, MN18CR2, MN22CR2 MN13CRMO, MN18CRMO, MN22CRMO
High chromium white cast irons Chrome 15%, Chrome 25%, Chrome 30% Cr25NiMo, Cr30NiMo and Etc
Alloy steels Various grades (SWB Germany)
High and low Carbon Steel
Ni-hard 2, 3, 4

Material	C	Mn	Si	Cr	Molly	Nikker	P	S	Suit to
Mn14Cr2	1.0-1.3	Mn:11-14	0.3-0.6	1.7-2.4	---	---	≤0.05	≤0.03	Jaw Plate, Side Plate, Mill Liner
Mn14Mo1	1.0-1.3	Mn:11-14	0.3-0.6	---	0.8-1.2	----	≤0.05	≤0.03	Shredder Hammer, Track Shoe
Mn18Cr2	1.1-1.4	Mn:17-20	0.3-0.6	1.7-2.4	---	----	≤0.05	≤0.03	Jaw Plate, Bowl Liner, Mantle
Mn18Cr2Mo0.6	1.1-1.4	Mn:17-20	0.3-0.6	1.7-2.4	0.6-0.8	---	≤0.05	≤0.03	Hard Abrassive Rock Crushing
Mn22Cr2Mo	1.1-1.4	Mn:20-24	0.3-0.6	1.7-2.4	----	----	≤0.05	≤0.03	Heavy Duty Concave, Mantle
KMTBCR15	2.8-3.2	Mn:0.6-0.8	0.6-0.8	14.5-15.5	0.2-0.3	0.2-0.3	≤0.06	≤0.06	Paddle Arm,Tip And Mixer Liner
KMTBCR27	2.8-3.3	Mn:0.6-0.8	0.6-0.8	26.5-28	0.3-0.5	0.3-0.5	≤0.06	≤0.06	Blow Bar, Paddle tip, VSI Parts,Anvil
KMTBCR30	2.8-3.3	Mn:0.6-0.8	0.6-0.8	28.5-30	0.3-0.5	0.3-0.5	≤0.06	≤0.06	Blow Bar, Paddle Tip, VSI Parts
Cr27Ni2Mo1	2.8-3.3	Mn:0.6-0.8	0.6-0.8	26.5-28	0.8-1.2	1.5-2.0	≤0.06	≤0.06	Heavy Duty Blow Bars
Ni-Hard	2.8-3.2	0.2-0.8	1.5-2.2	8.0-10.0	0.3-0.5	4.0-5.5	≤0.06	≤0.06	Mill Liner, Augers, Paddle Tip
Martensite Alloy Steel	0.3-0.6	0.8-1.5	≤1.2	1.8-2.3	0.2-1	0.5-0.8	≤0.06	≤0.06	Blow Bar, Mill Liner and etc
Carbon Steel	0.08-0.25	0.3-0.6	0.15-0.35	-----	----	----	≤0.045	≤0.045	Torch Ring, Shell, Bowl, Cone

Manufacturing Process:

QC/Testing:

Provide measurement check, Metallographic, machinery performance, hardness, ultrasonic inspection, coloring flaw testing, ultrasonic flaw testing and result a report before shipping.