- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
loading
HP4
ONA
847490
Eccentric Bushing, which used in Cone Crusher Eccentric Assembly.
Copper bushing parts are widely used in crushers. Copper castings parts on crushers generally include cone crusher outer bushings, eccentric bushings, socket liners, countershaft bushings, upper and lower thrust plates of crushers, and etc. The role of copper bushing parts is:
1) Increase and reduce the sliding friction of the equipment during operation, and reduce power loss;
2) Greatly increase the service life of the wear-resistant parts of the cone crusher, reduce repair and maintenance costs, and strive for higher equipment utilization;
3) Effectively protect the steel parts in contact with it from wear and tear, and it is easy to replace when the copper parts are worn out.
Copper parts are made of brass and tin bronze, and tin bronze is more widely used.
The specific grades are: ZCuPb15Sn7, ZCuPb20Sn5, ZCuPb10Sn10, etc.
1) If the outer cone of the eccentric sleeve is worn by more than 3 mm, it should be replaced;
2) The gap between the straight bushing and the eccentric bushing exceeds twice the original assembly gap; the straight bushing has cracks and exceeds 1/3 of the circumference or height. If any of the above is present, the straight bushing should be replaced;
3) If the gap between the taper sleeve and the upper part of the spindle is more than double the original assembly gap or there are serious cracks, the taper sleeve should be replaced;
4) If the tooth thickness of the conical gear is worn by more than 20%, it should be replaced;
5) The thrust bearing pad at the lower end of the eccentric sleeve should be replaced if the wear and non-parallel deviation exceeds 0.1 mm or the thickness wears more than 5 mm.
| Available Models for Cooper Bushing | ||
| Suit to MINYU | MSP Series | MSP100/MSP200/MSP300/MSP400 |
| MCC Series | 600/1000/1150/1300/1370/1500/1680 | |
| Suit to Metso | HP Series | HP200, HP300, HP400, HP500, HP3, HP4, HP5, HP6 |
| GP Series | GP100/100S,GP220/200S/GP330/300S,GP550/500S/GP7 | |
| MP Series | MP800, MP1000 | |
| Suit to Sandvik | CH/CS Series | CH/CS420,CH/CS430,CH/CS440,CH/CS660,CH/CS870 |
| Suit to Trio | TC Series | TC36, TC51, TC66, TC84 |
| Suit to Symons | STD&SH Series | 2FT, 3FT, 4FT, 4-1/4FT, 5-1/2FT, 7FT |
| Suit to Omnicone | X/SX Series | 937/1144/1352/1560 |
| Suit to Telsmith | SBS&SBX/T Series | T300, T400, T500, T900, SBS38/44/52/57/68, SBX44/52/57 |
| Suit to Terex MPS | TC/RC/MVP Series | RC45III, MVP550X, MVP450X, MVP380X, TC1300, TC1150, TC1000 |
| TG/TGS Series | TG/TGS120, TG/TGS220, TG/TGS320, TG/TGS420, TG820, TG1020 | |
| Suit to Shanbao | PY/PYF | PYB600/PYB900/PYZ900/PYB1200/PYFB0917 and etc |
Eccentric Bushing, which used in Cone Crusher Eccentric Assembly.
Copper bushing parts are widely used in crushers. Copper castings parts on crushers generally include cone crusher outer bushings, eccentric bushings, socket liners, countershaft bushings, upper and lower thrust plates of crushers, and etc. The role of copper bushing parts is:
1) Increase and reduce the sliding friction of the equipment during operation, and reduce power loss;
2) Greatly increase the service life of the wear-resistant parts of the cone crusher, reduce repair and maintenance costs, and strive for higher equipment utilization;
3) Effectively protect the steel parts in contact with it from wear and tear, and it is easy to replace when the copper parts are worn out.
Copper parts are made of brass and tin bronze, and tin bronze is more widely used.
The specific grades are: ZCuPb15Sn7, ZCuPb20Sn5, ZCuPb10Sn10, etc.
1) If the outer cone of the eccentric sleeve is worn by more than 3 mm, it should be replaced;
2) The gap between the straight bushing and the eccentric bushing exceeds twice the original assembly gap; the straight bushing has cracks and exceeds 1/3 of the circumference or height. If any of the above is present, the straight bushing should be replaced;
3) If the gap between the taper sleeve and the upper part of the spindle is more than double the original assembly gap or there are serious cracks, the taper sleeve should be replaced;
4) If the tooth thickness of the conical gear is worn by more than 20%, it should be replaced;
5) The thrust bearing pad at the lower end of the eccentric sleeve should be replaced if the wear and non-parallel deviation exceeds 0.1 mm or the thickness wears more than 5 mm.
| Available Models for Cooper Bushing | ||
| Suit to MINYU | MSP Series | MSP100/MSP200/MSP300/MSP400 |
| MCC Series | 600/1000/1150/1300/1370/1500/1680 | |
| Suit to Metso | HP Series | HP200, HP300, HP400, HP500, HP3, HP4, HP5, HP6 |
| GP Series | GP100/100S,GP220/200S/GP330/300S,GP550/500S/GP7 | |
| MP Series | MP800, MP1000 | |
| Suit to Sandvik | CH/CS Series | CH/CS420,CH/CS430,CH/CS440,CH/CS660,CH/CS870 |
| Suit to Trio | TC Series | TC36, TC51, TC66, TC84 |
| Suit to Symons | STD&SH Series | 2FT, 3FT, 4FT, 4-1/4FT, 5-1/2FT, 7FT |
| Suit to Omnicone | X/SX Series | 937/1144/1352/1560 |
| Suit to Telsmith | SBS&SBX/T Series | T300, T400, T500, T900, SBS38/44/52/57/68, SBX44/52/57 |
| Suit to Terex MPS | TC/RC/MVP Series | RC45III, MVP550X, MVP450X, MVP380X, TC1300, TC1150, TC1000 |
| TG/TGS Series | TG/TGS120, TG/TGS220, TG/TGS320, TG/TGS420, TG820, TG1020 | |
| Suit to Shanbao | PY/PYF | PYB600/PYB900/PYZ900/PYB1200/PYFB0917 and etc |
